Hi, thanks for responding.

I do not run Windows, I am currently only booting macOS.

Here is my USB section with no additional devices connected:

USB 3.0 Bus:

Host Controller Driver: AppleUSBXHCISPTLP PCI Device ID: 0x9d2f PCI Revision ID: 0x0021 PCI Vendor ID: 0x8086

USB3.0-CRW:

Product ID: 0x0316 Vendor ID: 0x0bda (Realtek Semiconductor Corp.) Version: 2.04 Serial Number: 20120501030900000 Speed: Up to 5 Gb/s Manufacturer: Generic Location ID: 0x14700000 / 44 Current Available (mA): 900 Current Required (mA): 800 Extra Operating Current (mA): 0

Vendor-Specific Device:

Product ID: 0x009a Vendor ID: 0x06cb (Synaptics Inc.) Version: 1.64 Serial Number: 7162a40765d2 Speed: Up to 12 Mb/s Location ID: 0x14600000 / 41 Current Available (mA): 500 Extra Operating Current (mA): 0 Built-In: Yes

Integrated Camera:

Product ID: 0x2113 Vendor ID: 0x5986 Version: 54.23 Speed: Up to 480 Mb/s Manufacturer: SunplusIT Inc Location ID: 0x14500000 / 42 Current Available (mA): 500 Current Required (mA): 500 Extra Operating Current (mA): 0 Built-In: Yes

L830-EB:

Product ID: 0x0210 Vendor ID: 0x2cb7 Version: 3.33 Serial Number: 004999010640000 Speed: Up to 480 Mb/s Manufacturer: FIBOCOM Location ID: 0x14400000 / 60 Current Available (mA): 500 Current Required (mA): 100 Extra Operating Current (mA): 0 Built-In: Yes

USB 3.1 Bus:

Host Controller Driver: AppleUSBXHCIAR PCI Device ID: 0x15c1 PCI Revision ID: 0x0001 PCI Vendor ID: 0x8086

I've ensured that bluetooth is working by live-booting Manjaro Linux, everything works fine there. Does your configuration show an actual bluetooth device?

The docking station uses thunderbolt. I can connect additional USB devices just fine, only the display support seems to be an issue. I've tried creating a custom USB map using corpnewt's USBmap tool but without much success (I can get USB/Camera etc. working, but the macOS still registers multiple displays as one).